Introduction; About This Manual; Audience; Warnings And Special Information - Printronix P7000 Programmer's Reference Manual

1

About This Manual

This manual lists the ANSI
printer when this emulation is loaded in your printer.

Audience

This book assumes you are an experienced programmer and are familiar with
the ANSI emulation.

Warnings and Special Information

Read and comply with all information highlighted under special headings:
WARNING
Conditions that could harm you as well as damage the equipment.
CAUTION
Conditions that could damage the printer or related equipment.
IMPORTANT
Information vital to proper operation of the printer.
NOTE: Information affecting printer operation.

Related Product Information

The User's Manual describes the keys on the control panel and provides
quick reference information on daily printer operations such as loading paper
and replacing ribbons. This book also provides configuration instructions and
descriptions and troubleshooting guidelines.

Software Features

The ANSI emulation software provides the following features:
•
Graphics and a selection of print densities. You can enable graphics
mode and specify a density mode (dots per inch).
•
Print Attributes. Characters can be bold, italic, double high, double wide,
etc.
•
Page Formatting. American National Standards Institute (ANSI)
commands allow you to set line spacing, page length, and vertical forms
control.

Introduction

®
commands and explains how to configure the
9