Printronix P7000 Programmer's Reference Manual page 18

Chapter 1
Installing Printer Emulations
The 9600 baud rate is the only selection older versions of MS-DOS can
use. The baud rate information entered in the above commands must
match the selection you made in step 9.
You can download the optional font files one at a time by entering one file
name per the copy command or you can copy multiple files in one copy
command.
To download one file at a time, enter the following at the command
prompt:
copy /b filename.dwn LPT1<Enter>
To download multiple files, enter the following at the command prompt,
for example:
copy /b filename1.dwn+filename2.dwn+...LPT1<Enter>
17. While the font file is copied into flash memory, the printer LCD informs
you of the load process and status. When the new file is successfully
loaded into memory, the printer will reset itself and go online.
18. To verify that the optional fonts have been downloaded:
a. Perform a configuration printout.
b. Select MAINT/MISC
NOTE: The optional font typefaces cannot be selected via the printer control
NOTE: Press the ONLINE key to place the printer online and return the
18
If you are loading the file using the serial port on the computer, type
the following commands:
mode COM1:9600,N,8,1,P<Enter>
copy /b filename.dwn COM1<Enter>
(where filename .dwn is a file you noted in step 15.)
File Systems
names will appear with the same part number file name you
downloaded, but with an .sf extension.
panel. They can only be selected via a software command from the
host.
printer to normal operation.
— OR —
View Files List. The new file