Printronix P7000 Programmer's Reference Manual page 99

SFCC
shadow printing
shuttle
sixel
size, type
SLD
slewing
SNA
soft reset
SOH
spacing
SSCC
start bit
stop bit
string
style, type
superset commands
symbol set
TCB
Special Function Control Character. The first
character in a printer command sequence. In
Proprinter III XL emulation mode, you can select one
of five characters as the SFCC. In Epson emulation
mode, the SFCC must always be the ASCII escape
character (ESC). See also command sequence and
escape sequence.
A typeface with a heavy line thickness produced by
doublestriking. The printer forms a character, then
prints it again, but fractionally offset from the first
position. See also bold, character weight.
The subassembly in a line matrix printer that includes
the hammer bank assembly and some or all of the
drive mechanism.
A vertical column consisting of six pixels and treated
as a unit in graphics applications.
See point.
Set Line Density
Rapid vertical paper movement.
Systems Network Architecture. A hardware and
software protocol used on IBM mainframe networks.
See warm start.
Start Of Header
See font, proportional and font, monospaced.
SuperSet Control Code. It is of the form SFCC | } ;
and is used to execute superset commands.
The signal that indicates the start of a character or
element in a serial data stream.
The signal that indicates the end of a character or
element in a serial data stream.
Two or more bytes of data or code treated as a unit.
See type style.
Commands which are an extension to the base
LinePrinter+ printer protocol, such as the bar code
commands for the Epson FX protocol. See also
SSCC.
See character set.
T
Task Control Block
99