Printronix P7000 Programmer's Reference Manual page 91

DSR
DTR
DVFU
EBCDIC
EC
ECMA
EEPROM
EIA/TIA
Elite
em
emulation
en
enable
escape sequence
ETX
EVFU
expanded
false
Data Set Ready. Status signal to the printer
indicating the host is in a ready condition.
Data Terminal Ready. Control signal from the printer
indicating it is in a ready condition.
Dataproducts direct access Vertical Format Unit.
E
Extended Binary Coded Data for Information
Communication.
Engine Controller
European Computer Manufacturers Association.
Electrically Erasable Programmable Read Only
Memory.
Electronic Industries Association/
Telecommunications Industry Association
A name indicating a monospaced font with a pitch of
12 cpi (and usually 10 points in height).
A unit of measure in typesetting: the width of a piece
of type about as wide as it is tall. (Derived from
uppercase M, usually the widest character in a set.)
Refers to the ability of a printer to execute the
commands of another printer protocol. When used as
a proper noun (e.g., Proprinter III XL Emulation), it
means printer protocol. See also compatibility and
protocol.
A unit of measure in typesetting equal to half the
width of an em.
To activate, make true (1), or set to on.
A command sequence in which the first byte is
always the ASCII ESC character. Same as "escape
code." See also command sequence, SFCC, SSCC.
End of Text. A transmission control character sent
from the host to the printer, indicating the end of
transmission of a block of data.
Electronic Vertical Format Unit. Relates to the ability
to slew (skip quickly a specified number of lines).
A font enhancement referring to larger-than-normal
character width with no change in character height.
F
Off or zero. Compare true.
91