Cut Sheet Tray Linking - Printronix L5535 User Manual

The following table lists the available standard settings for the cut
sheet paper feed cassette (0 = plastic insert; — = no insert):
Paper Size
Legal
Ledger
A3
B4
Letter
A4
Custom Size
(variable length 7.0 to
12.0 inches, variable
width 8.3 to 19.6
inches)

Cut Sheet Tray Linking

If your printer is equipped with the cut sheet paper feed option, you
can use Tray Linking. Tray Linking is disabled by default. With Tray
Linking enabled, when the active cut sheet paper tray runs out of
paper, the printer automatically switches to the other paper tray and
continues printing.
To enable or disable this feature, see the Tray Linking option on the
Paper Control menu, page 96.
NOTE: Disable Tray Linking if the two cut sheet paper trays are of
different sizes
If the cut sheet trays are of different sizes, and Tray Linking
is enabled, the printer will not switch to the alternate tray
when the first tray runs out of paper, nor will it display the
usual "CUT-SHEET PAPER EMPTY" message on the
LCD. Instead, the printer stops printing and displays the
message "TRAY MISMATCH."
Cut Sheet Tray Linking
IPS 12/22 IPS 11/21
— 0
0 0
0 —
0 —
— 0
— —
0 0
IPS 10/20
0
—
0
—
—
0
0
37