Cut Sheet Tray Linking (Optional Procedure) - Printronix L5535 Operator's Manual

When the plastic inserts in the cassette contact the paper size
sensors on the printer, the printer determines that the paper
cassette is in position and identifies the paper size.
The following table lists the available standard settings for the cut
sheet paper feed cassette (O = plastic insert; --- = no insert):
Paper size
Legal
Ledger
A3
B4
Letter
A4
Custom Size
(variable width - 7.0 - 12.0 inches)
(variable length - 8.3 - 19.6 inches)

Cut Sheet Tray Linking (Optional Procedure)

If your printer is equipped with the cut sheet paper feed option, you
can use Tray Linking. Tray Linking is disabled by default. With Tray
Linking enabled, when the active cut sheet paper tray runs out of
paper, the printer will automatically switch to the other paper tray
and continue printing.
To enable or disable this feature, see the Tray Linking option on the
Paper Control menu. Refer to the User's Manual for details.
NOTE: We recommend that you disable Tray Linking if the two cut
Cut Sheet Tray Linking (Optional Procedure)
IPS 12/22
---
O
O
O
---
---
O
sheet paper trays are of different sizes.
IPS 11/21 IPS 10/20
O O
O ---
--- O
--- ---
O ---
--- O
O O
35