Host Interface Menu - Printronix L5535 User Manual

When you turn on the printer, it reads the Flash memory as part of
its initialization, to determine what emulations are installed. Based
on this information, the printer then creates the appropriate
selections on the Mode menu. During power-up, the printer also
loads the power-up set of configuration values. The power-up set is
the same as the factory set until you save a new set to the power-
up configuration.
NOTE: Each emulation can have its own set of configuration

Host Interface Menu

The printer provides the following host interface options:
•
Centronics
•
Dataproducts
703316-001)
•
Serial (RS-232 or RS-422)
•
IEEE 1284 parallel
•
Ethernet (if installed)
•
Coax/Twinax (if installed)
•
Auto Switching
The configuration options for each interface type are shown in the
illustrations on the following pages. Descriptions of the options
follow each illustration. Set these options to meet the specific data
communication requirements of the host computer as well as the
application running on the host.
NOTE: For additional host interface signal information, see
options in addition to those that are in the printer system
list. For information on these unique configuration settings,
see the appropriate emulation manual.
®
parallel
®
parallel (requires optional cable adapter, p/n
Appendix C, on page 257.
Mode Menu
75