6
Troubleshooting
This chapter discusses diagnostic tests, paper jams, and system
messages (status and error).
Maintaining Print Quality
To maintain good print quality, clean the printer according to the
schedules and procedures listed in Chapter 5.
1. Do a General Cleaning (page 172).
NOTE: Recommended toner vacuum cleaner models are listed on
2. Clean the main charger, precharger, and transfer charger. For
3. If the printer is equipped with the cut sheet option, clean the
4. Clean the following areas with the designated tools:
Troubleshooting
page 159.
cleaning instructions, see page 180.
pickup rollers and the reverse rollers inside the cut paper unit,
using the Toraysee cloth. For cleaning instructions, see page
191.
•
Clean the drum with the drum freshener (only when smears
appear on print samples due to the drum).
•
Clean the LED array and the SELFOC
head) with the Toraysee™ cloth.
•
Clean the fuser cover glass with a razor blade or the cover
glass scraper.
®
lens (LED print
207