Loading Paper; Loading Fanfold Paper - Printronix L5535 User Manual

Chapter 2

Loading Paper

Loading Paper
This section explains how to load fanfold paper. To load cut sheet
paper, go to page 33.

Loading Fanfold Paper

When loading fanfold paper, be sure the leading edge of the paper
has a clean, separated perforation (without ragged edges or paper
chaff).
NOTE: If the printer runs out of paper during printing, you do not
Repeat the following steps whenever top-of-form must be reset
(after clearing a paper jam, loading new paper, etc.).
1. If your printer has the optional power paper stacker, set the
stacker page length adjustment on the side of the power
stacker to match the paper length you are using.
2. Place the fanfold paper box under the tractor unit with the first
paper fold toward the printer.
IMPORTANT
The first fold of the paper must face the printer. Otherwise, a
paper jam could occur during printing.
30
need to turn off printer power to replace paper. If you leave
the power on when you replace the paper then place the
printer online, it will resume printing automatically where it
left off.