Figure 46 shows all the data you would need to input for the example above.
The actual hardware interface is the user's responsibility.
Figure 46. Required Data For Indicator Lights
The connections to be made on the printer's I/O connector are given in
Figure 47.
500mA Fuse
Figure 47. I/O Connector Connections
Indicator Lights Example
34: R1 cm
35: R2 cm
36: R3 cm
37: R4 cm
38: R1 NC
39: R2 NC
40: R3 NC
41: R4 NC
42: R1 NO
43: R2 NO
44: R3 NO
45: R4 NO
24 V
24 V Ret
L1 - Red/Offline
L2 - Orange/Ribbon
L3 - Yellow/Operator-Paper
L4 - Green/Online
L1
L2
L3
L4
49