Printronix P5000 Series User Manual page 32

Chapter 2
Defining Reports
To create a report do the following:
1. Select Edit
the Report tab active (Figure 29). Two tabs are available, the Report and
Sections tabs.
NOTE: If you have not already defined a report, the GPIO Manager will
Figure 30. The Sections Tab of the Define Reports Dialog Box
2. Click the Sections tab (Figure 30). We will use this tab to define all
sections needed to make the full report. The printer front panel LCD is
has a maximum of 16 characters available per line to display the
message.
32
Define Reports. The Define Reports dialog box opens with
inform you that you need to first create a report before accessing it.