Other Competitors - Printronix P5000 Series User Manual

General purpose input/output (gpio) manager and module

Hide thumbs Also See for P5000 Series:

Table of Contents

Chapter

Mapping Examples

To emulate this interface using the Printronix GPIO board and the specified

cable, use the Event-to-Action Mapping table in Figure 44.

Figure 44. T3000 and Equivalent Mapping Table Using the Printronix GPIO Board

Other Competitors

Intermec

Intermec does not use a fixed signal definition for its Industrial Interface,

which is available in two versions. One Industrial Interface is an optional I/O

board with 4 opto-coupled inputs, 4 SPDT relay outputs, and a jumper for the

+5v supply voltage. The other version provides for 8 optically coupled inputs,

8 optically coupled outputs, and 4 SPDT relay outputs. Intermec's Fingerprint

language allows the programming of the I/O ports using the PORT-IN and

PORT-OUT commands, and as the functions of the I/O connections are

defined per application, no mapping table can be provided.

Table of Contents

T5000 series