Printronix P5000 Series User Manual page 21

General purpose input/output (gpio) manager and module
Hide thumbs Also See for P5000 Series:
Table of Contents

Advertisement

Printer Offline / Printer Online
These two actions switch the printer offline or online.
On/Offline Switch
This action allows the printer to be switched offline if it is online, and to be
switched online if it is offline. The switch works as a toggle.
Clear Buffer
A host or application controlled memory clear.
Pause Printing
This action results in the print engine going offline with the interface to the
host still active. This allows receiving and pre-processing of host data
until the buffer is full.
Start Printing
If there is data in the buffer, the printer will start printing until either
switched offline or paused through the Pause Printing action.
Print Next Label
This is an action which is a combination of the Start Printing and Pause
Printing actions. The printer is taken off Pause mode, a Start Printing
command is generated, and the printer is immediately placed in Pause
mode again. With the T5000e being a page printer, this results in the label
being finished and the printer ending in Pause mode.
Reprint Last Printed Label
Reprints the last page printed.
Form Feed
Performs a form feed.
Move Paper
This action allows the movement of paper either to the next top-of-form
(the gap) or, if required for specific applicator functions, a specified
distance forward or backward.
Figure 15. Setting Move Paper Action Parameters
Events and Actions
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

T5000 series

Table of Contents