Chapter
2
Overview
ODV Events
PAA Event
Data Field Changed
Event Descriptions
•
Input Opto-Couplers
For external input signals. You can specify the number of the
opto-coupler to view and the level on which the event is seen as active.
Clicking the opto-coupler symbol selects the active state.
Figure 8. Setting the Opto-coupler Number and State
•
Printer Powered Up
This event is delayed until the moment the printer reaches the Powered-
up-online or Powered-up-offline state. The delay is required so the printer
can finish its power-on reset cycle before any reaction to an event is
generated.
•
Printer Online
When the printer goes online by pressing the Pause key, the action
related to this event is taken.
•
Printer Offline
When the printer goes offline by pressing the Pause key or the menu key,
or if there is any other reason that causes the printer to switch offline, the
action related to this event is taken.
•
Printer Local
This event happens when the printer is paused by pressing the Pause
key. The printer accepts data from the host and parses this data until its
buffers are full. No printing occurs. The print engine is offline, but the
printer's data processing unit is still online.
14
Table 1: Events And Parameters
Thermal
Missing barcode, Quality error – Any or a
specific one, All ODV errors cleared
Event identifier
Data Field, Condition, Type, Value