Chapter
2
Data Fields
The Source drop down menu is the data field for which the event is active.
The Value field allows you to specify the number you want the Source to be
compared. The Condition field indicates when exactly the related action takes
place.
The following conditions are available:
Condition
None
= =
! =
<
< =
>
> =
For this example, set the following parameters (Figure 27).
Figure 27. Setting Event Parameters for a Forms Count Condition
If the value of the Forms Count field is equal to zero, then the Send Report
action executes. The resulting entry in the mapping table is shown in
Figure 28.
30
Table 4. Conditions and Actions
No condition, action taken on each change of Source
(data field)
'Equal' – action taken if Source equals Value
'Unequal' – action taken if Source and Value are different
'Smaller Than' – action taken if Source is smaller than Value
'Smaller Than or Equal To' – action taken if Source is smaller
than or equal to Value
'Larger Than' – action taken if Source is larger than Value
'Larger Than or Equal To' – action taken if Source is larger
than or equal to Value