Table of Contents
Advertisement
Bellfi res
1.7.6 Mounting fl ue gas restriction plate
Depending on the length and shape of the concentric fl ue system and the chimney
construction, you should, if indicated, fi t a restriction plate with a certain width (B) into
the ceiling of the combustion chamber.
To do this, see the set-up options as listed in fi gure 4 through 14.
Important:
Ensure that the correct fl ue gas restriction plate is mounted.
Use of the correct fl ue gas restriction plate will provide
optimum effi ciency, fl ame effect and combustion. Mounting
an incorrect fl ue gas restriction plate can result in damage
to the gas fi re.
Figure 28: Assembling restriction plate
Fit the restriction plate through the two openings in the baffl e plate.
Installation instructions
Screw fastening
restriction plate
Restriction
plate
(2x) for
Baffl e plate
English
49
Advertisement
Table of Contents
