Bellfires VIEW BELL YORK 3 CF Installation Instructions & Manual For Maintenance page 26

Bellfi res
1.6.2 Item descriptions for fi gures 4 t/m 14
FIG. NO. DESCRIPTION
1 Gas fi re; Concentric
2 -
3 -
4 Restriction plate (The different sizes restriction plates are supplied with every appliance)
5 Chimney, min. Ø150 mm internal, totally gas tight.
6 Chimney or fi reproof sleeving. Min. Ø160 mm internal.
7 Ø100 mm internal fl exible stainless steel gas vent chimney liner AISI 316TI (Gastec QA).
8 Ø150 mm internal fl exible stainless steel gas vent chimney liner AISI 316TI.
9 -
For the suitable and available components for concentric
chimney systems, please consult the instruction book:
"AVAILABLE COMPONENTS CONCENTRIC FLUE-SYSTEMS
FOR BELLFIRES GAS FIRES WITH CLOSED COMBUSTION
SYSTEM"
• The room-sealed gas appliances have been approved in
combination with the components of the concentric fl ue systems
listed in the instruction book: 'AVAILABLE COMPONENTS
CONCENTRIC FLUE-SYSTEMS FOR BELLFIRES GAS FIRES
WITH CLOSED COMBUSTION SYSTEM', according to the
European CE norm for gas appliances and may therefore be used
only with these components.
• The components of the concentric fl ue system
* Bellfi res
* Poujoulat
* Ontop
* Jeremias/STB - H-Twin System (STB = Schoorsteen Techniek
* Jeremias
may not be used together in one installation.
• Check whether the wall or roof termination kit to be used exactly
matches one of those listed in the above mentioned instruction book.
26
fl ue connection Ø130/Ø200 mm or Ø100/Ø150 mm
- Muelink & Grol System
- DUOGAS System
- Metaloterm US System
Brummen NL)
- TWIN-GAS System
English
of:
Installation instructions