Table of Contents
Advertisement
9
Using the System
To open the Navigation bar:
• Left click on the screen to open the Navigation Bar. The Navigation Bar has the follow-
ing options:
1. Main Menu.
2. Collapse.
3. Select display layout.
4. Sequence: Click to start/stop sequence mode.
5. PTZ: Click to open PTZ controls.
6. Camera: Click to open camera image settings.
7. Search: Search and playback recorded video. See 17.4 Playback, page 83.
8. Alarm Status: View alarms in progress. See 15.2.4 Event Info, page 48.
9. Channel Info: Click to access status information about connected cameras.
10. Device Search: Manage IP cameras over the network.
11. Network: Configure network settings for your system. See 15.3.1 Network, page
51.
12. HDD Manager: Manage hard drives connected to the system. See 15.3.19 For-
matting the Hard Drive, page 63.
13. USB Manager: Click to access options for connected USB thumb drives (not in-
cluded). You can backup video, logs, or system configurations and install firmware
upgrades.
14. System Upgrade: Check for firmware upgrades. The system must be connected
to the Internet to check for or receive updates.
9.5 Using the Camera Toolbar
The Camera Toolbar is used to perform actions on a specific channel.
To access the Camera Toolbar:
• Move the mouse to the top of the channel display. The Camera Toolbar has the follow-
ing options:
1. Quick Playback.
2. Digital zoom.
3. Real-time backup.
4. Snapshot.
5. 2–way audio.
6. Device Search.
9.5.1 Using Quick Playback
Quick Playback is used to playback the last 5~60 minutes of video from the selected
channel. You can also access Quick Playback in split-screen mode, while still viewing
live video from the other channels.
#LX400022; r.16694/30364; en-US
20
Advertisement
Table of Contents
