Table of Contents
Advertisement
17
Using FLIR Cloud™ Client for PC or Mac
17.2.1 Live View Controls
1. Live display: Double-click to expand the area. Right-click to access additional op-
tions. Hold the mouse over the display area to access the camera toolbar.
Camera toolbar:
1.1.
Streaming quality: Shows the bitrate and resolution for the stream, and
shows if display is showing the Sub Stream or Main Stream.
1.2.
Manual recording: Click to start/stop manual recording.
1.3.
Snapshot: Click to save a snapshot.
1.4.
Mute/unmute: Click to mute/unmute audio (audio camera required).
1.5.
Not supported.
1.6.
Instant playback: Plays back the most recently recorded video from the
camera. By default, it will play back the last 5 minutes of recorded video from
the camera.
1.7.
Digital zoom: Click to enable digital zoom mode. Click and drag over the dis-
play area to zoom on the camera. Then click and drag to pan. Click the icon
again to zoom out.
1.8.
Disconnect.
1. Split-screen mode: Click to select split-screen layout.
2. Aspect ratio: Use the drop down menu to select the aspect ratio for the selected
camera. Original uses the actual aspect ratio of the image. Full-win stretches the
image to fill up the entire display area.
3.
Full-screen: Click to open full-screen mode. Press ESC to exit full-screen mode.
4.
Save view: Click to save the current display layout and open cameras as a view.
Then enter a name for the view.
#LX400022; r.16694/30364; en-US
78
Advertisement
Table of Contents
