Table of Contents
Advertisement
8
Using the System
1. Main Menu.
2. Collapse.
3. Select display layout.
4. Sequence Control: Click to start/stop sequence mode.
5. PTZ: Click to open PTZ controls.
6. Camera: Click to open camera image settings.
7. Search: Search and playback recorded video. See 16.4 Playback, page 90.
8. Alarm Status: View alarms in progress. See 14.2.4 Alarm Status, page 53.
9. Channel Info: Click to access status information about connected cameras.
10. Remote Device Search: Manage IP cameras over the network.
11. Network: Configure network settings for your system. See 14.3.1 Network, page 57.
12. HDD Manager: Manage hard drives connected to the system. See 14.3.16 Format-
ting the Hard Drive, page 69.
13. USB Manager: Click to access options for connected USB thumb drives (not in-
cluded). You can backup video, logs, or system configurations and install firmware
upgrades.
14. System Upgrade: Check for firmware upgrades. The system must be connected to
the Internet to check for or receive updates.
8.5 Using the Camera Toolbar
The Camera Toolbar is used to perform actions on a specific channel.
To access the Camera Toolbar:
• Move the mouse to the top of the channel display. The Camera Toolbar has the follow-
ing options:
1. Quick Playback.
2. Digital Zoom.
3. Real-time backup.
4. Snapshot.
5. Mute/Unmute.
8.5.1 Using Quick Playback
Quick Playback is used to playback the last 5~60 minutes of video from the selected chan-
nel. You can also access Quick Playback in split-screen mode, while still viewing live video
from the other channels.
#LX400060; r.36893/36903; en-US
22
Advertisement
Table of Contents
