Table of Contents
Advertisement
Install the Software
The M9210A PXI-H 10-bit Digitizing Scope module software is located on the Agilent MD1 High-Speed
Digitizer Software and Product Information CD CD (M9210-90007) and the Agilent IO Library Suite CD (E2904-
60003). This software is also available for download at the Agilent website
Administrator privileges will be needed for software and hardware installation. This includes the
case of first-time installation of a module in a different crate slot.
This installation includes the following:
Agilent IO Library Suite (IOLS), which includes the Agilent Connection Expert. This software must be
l
installed first.
Version 16.2 (or newer) of the Agilent IO Libraries Suite is required.
Soft Front Panel (SFP), device drivers (IVI-C, IVI-COM, and LabVIEW G) for all modules.
l
1. From the Agilent IOLS CD (E2904-60003) browser launch the installer.
2. Follow the installer prompts to install the IO Library Suite.
3. From the Agilent MD1 High-Speed Digitizer Software and Product Information CD CD (M9210-90007) launch
the installer.
4. Follow the installer prompts to install all software and documentation.
5. After installation is complete, re-start the chassis and the host PC if you are using a remote controller.
Agilent M9210A PXI-H 10-bit Digitizing Scope Startup Guide
Return the module for service
www.agilent.com/find/PXI-Digitizers
11
Advertisement
Table of Contents
