Programming The Instruction Message - 1837 System - DoorKing 1835 Owner's Manual

3.4.5 Programming the Instruction Message – 1837 System
The instruction message is displayed on the bottom four lines of the 1837 display. This message can be a
maximum of 80 characters (spaces count as a character) and is entered into the system memory in four
blocks. The example below shows how the sample message was divided into four blocks and centered on
the screen. Use the blank table to organize your own message. Only upper case letters, numbers and
spaces can be programmed from the system keypad.
Factory Default Instruction Message: Use A-Z to Find Name Or Number - Enter Code On Keypad - Busy
Press Any Key - Try Again.
Example: USE A Z TO FIND NAME OR NUMBER ENTER CODE ON KEYPAD BUSY PRESS ANY KEY TRY AGAIN
1 2
U S
Block 1
Block 2
O R
Block 3
O N
Block 4
A N
Note: The factory default message was programmed from a PC, therefore upper and lower case letters are displayed.
1 2
Block 1
Block 2
Block 3
Block 4
After organizing the instruction message in the table above, follow the instructions below to enter the message into the system.
After each desired letter, number or space is displayed on the directory, remember to press
count as a character and must be entered into memory as a character. After a complete block of characters (including spaces)
has been entered, press
TUV TUV SP SP
1. Press
8 8 1 1
The LCD display on the 1837 system will read: BLOCK 1.
2. Enter the characters into block 1 (refer to 3.4.1 for reference). Remember to press
3. After the last character in the block has been entered, press
The LCD display will read: BLOCK 2.
4. Repeat steps 2 and 3 to enter characters into block 2.
The LCD display will read: BLOCK 3.
5. Repeat steps 2 and 3 to enter characters into block 3.
The LCD display will read: BLOCK 4.
6. Repeat steps 2 and 3 to enter characters into block 4.
7. Press (beep) to enter all four blocks into the system memory.
OPER OPER
8. Press together to end this programming sequence (beeeeeep).
0 0
9. The new user message will be centered on the screen.
1835-065-D-5-17
3 4 5 6 7
E A Z
N U M B
K E Y P
Y K E Y
3 4 5 6 7
to enter the block, then start the next block.
*
and enter your four-digit MASTER CODE
8 9 10 11 12
T O F
E R E N
A D B U
T R Y
8 9 10 11 12
? ? ? ? ? ?
(beep) to enter the entire block.
13 14 15 16 17
I N D N
T E R C
S Y P R
A G A I N
13 14 15 16 17
to enter that character. Spaces
*
? ?
(beep).
(beep) after each character.
A
SP SP ABC ABC DEF DEF
1 1 2 2 3 3
GHI GHI JKL JKL MNO MNO Z
4 4 5 5 6 6
PQRS PQRS TUV TUV WXYZ WXYZ
7 7 8 8 9 9
OPER OPER
0 0 CALL
18 19 20
A M E
O D E
E S S
18 19 20
41