Self-Standing Lighted Kiosk Dimensions And Installation - DoorKing 1835 Owner's Manual

1.3.3 Self-Standing Lighted Kiosk Dimensions and Installation

The flush mount kit (Sold separately) is installed into the self-standing
kiosk (P/N 1200-170) to secure the flush mounts units ONLY in place.
Secure the rough-in box in the kiosk. Run all necessary wires to rough-in
box. Slide the trim ring into the rough-in box. Slide the enclosure in the
trim ring and secure them all together with hardware included in the kit.
"
6 0
1835-065-D-5-17
P l a
s t i c
T r i
m
R i n
R o
u g
h - I
B o
n
x
L o
c k n
u t
S p
a c e
r
F l u
s h
M o
E n c
u n
l o s
t
u r e
K n
o c k
- o u
t s
g
WARNING!
system is used to control a
vehicular gate with an
automatic gate operator, the
entry system must be
mounted a minimum of six
(6) feet away from the gate
and gate operator, or in
such a way that a person
cannot operate the entry
system and touch the gate
or gate operator at the same
time.
If this entry
13