ZiLOG Z8 GP ZGP323 User Manual page 4

Z8 GP™ ZGP323 Programming System
User Manual
Page 4
4. Select
5. Browse to the driver directory, one of the following:
<ZDSII Installation Directory>\device drivers\USB
<ZDSII Installation CD>\Device Drivers\USB
6. Click
7. Click
Windows 2000
1. Connect the 5 VDC power supply to the Programming System and apply power.
2. Connect the Programming System to the host PC using the USB cable.
The Found New Hardware Wizard should activate automatically.
3. In the Wizard, click
4. Select
5. Select
6. Browse to the driver directory, one of the following:
<ZDSII Installation Directory>\device drivers\USB
<ZDSII Installation CD>\Device Drivers\USB
7. Click
8. Click
Windows 98SE
1. Connect the 5 VDC power supply to the Programming System and apply power.
2. Connect the Programming System to the host PC using the USB cable.
The Found New Hardware Wizard should activate automatically.
3. In the Wizard, click
4. Select
5. Select
<ZDSII Installation Directory>\device drivers\USB
<ZDSII Installation CD>\Device Drivers\USB
6. Click
7. Click
Installing the USB Interface Driver and Cable
Downloaded from Elcodis.com electronic components distributor
Search for the best driver in these locations and Include this location in search
, and then click
Next Next
to complete the installation.
Finish
.
Next
Search for a suitable driver for my device (Recommended);
then click
Specify a location;
, and then click
OK Next
to complete the installation.
Finish
.
Next
Search for the best driver for your device (Recommended);
then browse to the driver directory, one of the following:
Specify a location;
, and then click
Next Next
to complete the installation.
Finish
again after the appropriate driver is found.
.
Next
after the appropriate driver is found.
again after the appropriate driver is found.
.
then click
Next.
then click .
Next
UM019101-0305