Securing To The Cabinetry; Re-Adjusting The Kickplate; Securing With Mounting Brackets - Viking Range 3 Series Installation Manual

9 SECURING TO THE CABINETRY

9.1 READJUSTING FOOT LEVELS
Now that the dishwasher is in the cabinet
you must readjust the feet to bring the
dishwasher up to the required height and
attach it underneath the countertop.
1. Readjust the front foot levels with
adjusting wrench to balance the
dishwasher and raise it up under the
countertop, make sure the unit is level.
2. Readjust the rear foot levels with a
screwdriver to balance the dishwasher
and raise it to the required height using
the brackets supplied.
3. Attach the dishwasher underneath the
countertop with the four screws supplied
(Ø 1/8" x 1/8" - Ø 3.5mm x 14mm). Make
sure you do not go through the top of the
countertop or damage granite.

9.2 SECURING WITH MOUNTING BRACKETS

If your counter is wooden fix the mounting brackets (A) under the counter with the screws
supplied. Bend sides of mounting brackets (B) in order to fix from sides (if necessary).
B
?
16
USA
A