Adjusting The Height; Placement Of Dishwasher Into Opening - Viking Range 3 Series Installation Manual

7.3 ADJUSTING HEIGHT
If the height of the enclosure is 33 7/8" to 35 7/8" (861 mm - 911mm) adjust feet as
shown.
Adjust the front foot level by hand to
balance and raise the dishwasher to the
enclosure height.
Adjust the rear foot level with a screwdriver
to balance and raise the dishwasher to the
enclosure height.
NOTICE :
• Make sure the dishwasher is plumb and
that the dishwasher can be placed under
the counter with approximately 3/32" (2
mm) of clearance.
• Turning the screwdrive in the direction
of the black arrows (as shown in the
illustration right) will raise the rear feet,
causing the dishwasher to go down in the
back.
• Turning the screwdriver in the direction
of the white arrows (as shown in the
illustration right) will lower the rear feet,
causing the diswasher to go up in the
back.
7.4 PLACEMENT OF DISHWASHER INTO THE OPENING
Now place the dishwasher into the opening and get ready to connect all hoses and
electrical connections.
Make sure all hoses
are pulled through the
side opening of the
cabinet, no hoses are
kinked and all slack is
taken out as shown in
the figure.
12
USA
CAUTION