Installing The Side Plugs; Installing The Side Trim - Viking Range 3 Series Installation Manual

6.4 INSTALLING THE SIDE PLUGS

6.5 INSTALLING THE SIDE TRIM

:
NOTE Side trim may or may not have notches already cut. If there are no notches, you
will need to measure and cut notches as shown in diagram below to match side plug
locations before installing.
Make sure you are using the correct side of the trim. The flexible material should be facing
forward (Figure A)
Remove the adhesive tape (Figure B)
Place the trim strips on the front edge of the side walls so that the notches align with the
side plugs (Figure C).
x1
A
B
10
FR
Install the 4 spacers (v) into the
openings on each side of the
dishwasher as shown.
x1
C