H&S 5226 Operator's Manual page 29

ADJUSTMENTS
FRONT & REAR AUGER SLIDES
The front and rear auger slide assemblies are retained by
adjustment plates with diagonal slots. To adjust, loosen
retaining hardware and drive the plates downward with
a hammer until the slide assembly is snug against the
tank, then retighten the retaining hardware. Grease the
slide assembly to ensure a leak-free seal.
DISCHARGE GATE
The discharge gate is retained by adjustable
angles that secure the gate to the tank
through diagonal slots. To adjust, loosen
retaining hardware and drive the angles
downward with a hammer until the discharge
gate is snug against the tank, then retighten
the retaining hardware. Grease the discharge
gate to ensure a leak-free seal.
-27-