Operating Instructions - Fire Sense Pro Series Manual

OPERATING INSTRUCTIONS

A dented, rusted or damaged propane cylinder may be hazardous and should be
checked by your cylinder supplier. Never use a propane cylinder with a damaged
The propane cylinder must be constructed and marked in accordance with the
or the standard for cylinders, spheres and tubes for transporta
goods and commission, CAN/CSA-B339.
A minimum supply pressure of .5 psi is required for the purpose of input
adjustment of propane gas.
The cylinder must be equipped with a listed over-fill
the appliance.
The cylinder used must include a collar to protect the cylinder valve.
Never connect an unregulated propane cylinder to the heater.
r. Tighten fully to c
Secure the propane cyli
it comes in contact with the cylinder.
• Do not store a spare LPG cylinder under or near this appliance;
• Never fill the cylinder beyond 80 percent full;
• Place the dust cap on the cylinder valve outlet whenever the cylinder is not
in use. Only install the type of dust cap on the cylinder valve that is
provided with the cylinder valve. Other types of caps or plugs may result in
leakage of propane.
Keep children away during assembly. This item contains small parts which can be
swallowed by children.
Do not use indoors or inside any enclosure. For indoor storage of the appliance,
disconnect the LPG cylinder and leave outdoors.
Retai
Instal
Contact us for assistance: (866) 985-7877 | www.balkenehome.com
on device.
.
enin
r.
WARNING
FOR YOUR SAFETY
ignite this heater. Holding in the control
knob for more than 10 seconds before
igni ll cause a ball of flame
upon igni
WARNING
FOR YOUR SAFETY
Heater will e with
care.
y
9