Table of Contents
Advertisement
OPERATING INSTRUCTIONS
A dented, rusted or damaged propane cylinder may be hazardous and should be
checked by your cylinder supplier. Never use a propane cylinder with a damaged
valve connection.
The propane cylinder must be constructed and marked in accordance with the
specifications for LPG cylinders of the U.S. Department of Transportation (DOT)
or the standard for cylinders, spheres and tubes for transportation of dangerous
goods and commission, CAN/CSA-B339.
The cylinder must be equipped with a listed over-filling prevention device.
The cylinder must have a connection device compatible with the connection for
the appliance.
The cylinder used must include a collar to protect the cylinder valve.
Never connect an unregulated propane cylinder to the heater.
Attach regulator to cylinder. Complete attachment.
Secure the propane cylinder with the cylinder screw by tightening the screw until
it comes in contact with the cylinder.
• Do not store a spare LPG cylinder under or near this appliance;
• Never fill the cylinder beyond 80 percent full;
• Place the dust cap on the cylinder valve outlet whenever the cylinder is not
in use. Only install the type of dust cap on the cylinder valve that is
provided with the cylinder valve. Other types of caps or plugs may result in
leakage of propane.
Keep children away during assembly. This item contains small parts which can be
swallowed by children.
Do not use indoors or inside any enclosure.
Retain the assembly instructions for future reference.
Installer - Please leave these instructions with the owner.
Contact us for assistance: (866) 985-7877 | www.wtliving.com
WARNING
FOR YOUR SAFETY
Be careful when attempting to manually
ignite this heater. Holding in the control
knob for more than 10 seconds before
igniting the gas will cause a ball of flame
upon ignition.
WARNING
FOR YOUR SAFETY
Heater will be hot after use. Handle with
care.
8
Hide quick links:
Advertisement
Table of Contents
