Stopping Navigation; Map; Viewing The Map; Saving Or Navigating To A Location On The Map - Garmin FENIX 6Z Pro Solar Owner's Manual

appears on the map from your current location to
the starting point of the last saved activity if you
are not using direct routing.
NOTE: You can start the timer to prevent the device
from timing out to watch mode.
7 Press DOWN to view the compass (optional).
The arrow points toward your starting point.

Stopping Navigation

1 During an activity, hold MENU.
2 Select Stop Navigation.

Map

Your device comes preloaded with maps and can
display several types of Garmin map data, including
topographical contours, nearby points of interest, ski
resort maps, and golf courses.
To purchase additional map data and view
compatibility information, go to garmin.com/maps.
represents your location on the map. When you are
navigating to a destination, your route is marked with a
line on the map.

Viewing the Map

1 Start an outdoor activity.
2 Press UP or DOWN to scroll to the map screen.
3 Hold MENU, and select an option:
• To pan or zoom the map, select Pan/Zoom.
TIP: You can press
up and down, panning left and right, or zooming.
You can hold to select the point indicated by
the crosshairs.
• To see nearby points of interest and waypoints,
select Around Me.

Saving or Navigating to a Location on the Map

You can select any location on the map. You can save
the location or start navigating to it.
1 From the map, hold MENU.
2 Select Pan/Zoom.
Controls and crosshairs appear on the map.
3 Pan and zoom the map to center the location in the
crosshairs.
4 Hold to select the point indicated by the
crosshairs.
5 If necessary, select a nearby point of interest.
Navigation
to toggle between panning
6 Select an option:
• To start navigating to the location, select Go.
• To save the location, select Save Location.
• To view information about the location, select
Review.

Navigating with the Around Me Feature

You can use the around me feature to navigate to
nearby points of interest and waypoints.
NOTE: The map data installed on your device must
include points of interest to navigate to them.
1 From the map, hold MENU.
2 Select Around Me.
Icons indicating points of interest and waypoints
appear on the map.
3 Press UP or DOWN to highlight a section of the
map.
4 Press .
A list of points of interest and waypoints in the
highlighted map section appear.
5 Select a location.
6 Select an option:
• To start navigating to the location, select Go.
• To view the location on the map, select Map.
• To save the location, select Save Location.
• To view information about the location, select
Review.

Changing the Map Theme

You can change the map theme to display map data
optimized for your activity type. For example, high
contrast map themes provide better visibility in
challenging environments, and activity- specific map
themes display the most important map data at-a-
glance.
1 Start an outdoor activity.
2 Hold MENU.
3 Select the activity settings.
4 Select Map > Map Theme.
5 Select an option.

Compass

The device has a 3-axis compass with automatic
calibration. The compass features and appearance
change depending on your activity, whether GPS
is enabled, and whether you are navigating to a
destination. You can change the compass settings
manually (Compass Settings, page
compass settings quickly, you can press
compass widget.

Setting the Compass Heading

1 From the compass widget, press
2 Select Lock Heading.
3 Point the top of the watch toward your heading,
and press .
43). To open the
from the
.
35