Table of Contents
Advertisement
fit-and-care.
Cleaning the Leather Bands
1 Wipe the leather bands with a dry cloth.
2 Use a leather conditioner to clean the leather
bands.
Changing the QuickFit
1 Slide the latch on the QuickFit band, and remove
the band from the watch.
2 Align the new band with the watch.
3 Press the band into place.
NOTE: Make sure the band is secure. The latch
should close over the watch pin.
4 Repeat steps 1 through 3 to change the other
band.
Metal Watch Band Adjustment
If your watch includes a metal watch band, you should
take your watch to a jeweler or other professional to
adjust the length of the metal band.
Troubleshooting
My device is in the wrong language
You can change the device language selection if you
have accidently selected the wrong language on the
device.
1 Hold MENU.
2 Scroll down to the last item in the list, and press
3 Press
.
4 Select your language.
Is my smartphone compatible with my device?
The fēnix device is compatible with smartphones
using Bluetooth wireless technology.
Go to
Garmin.com.sg/ble
information.
My phone will not connect to the device
If your phone will not connect to the device, you can
50
Bands
®
for compatibility
try these tips.
y Turn off your smartphone and your device, and turn
them back on again.
y Enable Bluetooth technology on your smartphone.
y Update the Garmin Connect app to the latest
version.
y Remove your device from the Garmin Connect app
and the Bluetooth settings on your smartphone to
retry the pairing process.
y If you bought a new smartphone, remove your
device from the Garmin Connect app on the
smartphone you intend to stop using.
y Bring your smartphone within 10 m (33 ft.) of the
device.
y On your smartphone, open the Garmin Connect
app, select
Add Device to enter pairing mode.
y From the watch face, hold MENU, and select Phone
> Pair Phone.
Can I use my Bluetooth sensor with my watch?
The device is compatible with some Bluetooth
sensors. The first time you connect a sensor to your
Garmin device, you must pair the device and sensor.
After they are paired, the device connects to the
sensor automatically when you start an activity and
the sensor is active and within range.
1 Hold MENU.
2 Select Sensors & Accessories > Add New.
3 Select an option:
• Select Search All Sensors.
• Select your sensor type.
You can customize the optional data fields
(Customizing the Data Screens, page
My headphones will not connect to the device
If your headphones were previously connected to your
smartphone using Bluetooth technology, they may
connect to your smartphone before connecting to your
device. You can try these tips.
y Turn off Bluetooth technology on your smartphone.
Refer to the owner's manual for your smartphone
for more information.
.
y Stay 10 m (33 ft.) away from your smartphone
while connecting headphones to your device.
y Pair your headphones with your device
Bluetooth Headphones, page
My music cuts out or my headphones do not
stay connected
When using a fēnix device connected to headphones
using Bluetooth technology, the signal is strongest
when there is a direct line of sight between the device
and the antenna on the headphones.
or
, and select Garmin Devices >
37).
16).
Troubleshooting
(Connecting
Advertisement
Table of Contents
