Golfing; Playing Golf; Hole Information; Measuring Distance With Button Targeting - Garmin FENIX 6Z Pro Solar Owner's Manual

4 Select a distance for the completed drill.
Distance increments are based on the pool size
selected for the activity profile.
5 Select an option:
• To start another drill interval, press LAP.
• To start a swim interval, press UP or DOWN to
return to the swim training screens.

Golfing

Playing Golf

Before you play golf, you should charge the device
(Charging the Device, page
1 From the watch face, press
2 Select Golf.
3 Go outside, and wait while the device locates
satellites.
4 Select a course from the list of available courses.
5 If necessary, set your driver distance.
6 Select Yes to keep score.
7 Select a tee box.
8 After you complete your round, press
End Round.

Hole Information

The device shows the current hole you are playing,
and automatically transitions when you move to a new
hole.
NOTE: Because pin locations change, the device
calculates the distance to the front, middle, and back
of the green, but not the actual pin location.
Current hole number
1
Distance to the back of the green
2
Distance to the middle of the green
3
Distance to the front of the green
4
Par for the hole
5
Map of the green
6
Driver distance from the tee box
7
Big Numbers Mode
You can change the size of the numbers on the hole
information screen.
Hold MENU, select the activity settings, and select Big
Numbers.
Activities and Apps
2).
.
, and select
The distance to the back of the green
1
The distance to the middle of the green or
2
selected pin position
The distance to the front of the green
3
The current hole number
4
The par for the current hole
5

Measuring Distance with Button Targeting

From the hole information screen, you can use the
button targeting feature to measure the distance to a
point on the map.
1 Press UP or DOWN to measure the distance to the
target.
2 If necessary, select

Changing Holes

You can change holes manually from the hole view
screen.
1 While playing golf, press
2 Select Change Hole.
3 Select a hole.

Moving the Flag

You can take a closer look at the green and move the
pin location.
1 From the hole information screen, press
2 Select Move Flag.
3 Press UP or DOWN to move the pin position.
4 Press .
The distances on the hole information screen are
updated to show the new pin location. The pin
location is saved for only the current round.

Viewing Measured Shots

Before the device can automatically detect and
measure shots, you must enable scoring.
Your device features automatic shot detection and
recording. Each time you take a shot along the fairway,
the device records your shot distance so you can view
it later.
TIP: Automatic shot detection works best when you
wear the device on your leading wrist and make good
contact with the ball. Putts are not detected.
1 While playing golf, press
2 Select Measure Shot.
or to zoom in or out.
.
.
.
7