Customizing The My Day Widget; Customizing The Controls Menu; Watch Face Settings; Customizing The Watch Face - Garmin FENIX 6Z Pro Solar Owner's Manual

Customizing the My Day Widget

You can customize the list of metrics displayed on the
My Day widget.
1 From the watch face, press UP or DOWN to view
the My Day widget.
2 Hold MENU.
3 Select Options.
4 Select the toggle switches to show or hide each
metric.

Customizing the Controls Menu

You can add, remove, and change the order of the
shortcut menu options in the controls menu
the Controls Menu, page 1).
1 Hold MENU.
2 Select Controls.
3 Select a shortcut to customize.
4 Select an option:
• Select Reorder to change the location of the
shortcut in the controls menu.
• Select Remove to remove the shortcut from the
controls menu.
5 If necessary, select Add New to add an additional
shortcut to the controls menu.

Watch Face Settings

You can customize the appearance of the watch face
by selecting the layout, colors, and additional data.
You can also download custom watch faces from the
Connect IQ store.

Customizing the Watch Face

Before you can activate a Connect IQ watch face, you
must install a watch face from the Connect IQ store
(Connect IQ Features, page
You can customize the watch face information and
appearance, or activate an installed Connect IQ watch
face.
1 From the watch face, hold MENU.
2 Select Watch Face.
3 Press UP or DOWN to preview the watch face
options.
4 Select Add New to scroll through additional pre-
loaded watch faces.
5 Select > Apply to activate a pre-loaded watch
face or an installed Connect IQ watch face.
6 If using a pre-loaded watch face, select
Customize.
7 Select an option:
• To change the style of the numbers for the
analog watch face, select Dial.
• To change the sport for the gauges on the
performance watch face, select Select Sport.
• To change the style of the hands for the analog
Customizing Your Device
(Viewing
14).
>
watch face, select Hands.
• To change the style of the numbers for the
digital watch face, select Layout.
• To change the style of the seconds for the
digital watch face, select Seconds.
• To change the data that appears on the watch
face, select Data.
• To add or change an accent color for the watch
face, select Accent Color.
• To change the background color, select Bkgd�
Color.
• To save the changes, select Done.

Sensors Settings

Compass Settings

Hold MENU, and select Sensors & Accessories >
Compass.
Calibrate: Allows you to manually calibrate the
compass sensor (Calibrating the Compass Manually,
page 43).
Display: Sets the directional heading on the compass
to letters, degrees, or milliradians.
North Ref�: Sets the north reference of the compass
(Setting the North Reference, page
Mode: Sets the compass to use electronic-sensor data
only (On), a combination of GPS and electronic-
sensor data when moving (Auto), or GPS data only
(Off).
Calibrating the Compass Manually
Calibrate the electronic compass outdoors. To
improve heading accuracy, do not stand near objects
that influence magnetic fields, such as vehicles,
buildings, and overhead power lines.
Your device was already calibrated at the factory,
and the device uses automatic calibration by default.
If you experience irregular compass behavior, for
example, after moving long distances or after extreme
temperature changes, you can manually calibrate the
compass.
1 Hold MENU.
2 Select Sensors & Accessories > Compass >
Calibrate > Start.
3 Follow the on-screen instructions.
TIP: Move your wrist in a small figure eight motion
until a message appears.
Setting the North Reference
You can set the directional reference used in
calculating heading information.
1 Hold MENU.
2 Select Sensors & Accessories > Compass > North
Ref�.
3 Select an option:
43).
NOTICE
43