Preparing For Operation - H&S 7116 Operator's Manual

1. Adjust the tractor hitch (13 to 17 inches above
ground) and attach the rake to the tractor with
a hitch pin and a safety locking device.
2. Remove the weight from lift jack. Remove the jack from the pipe and place it on the convenient
storage mount located on the front top of rake beam (A).
3. Connect the hydraulic hoses for raising and lowering the rake wheels to a double acting valve on
the tractor.
4. Connect the hydraulic hoses for opening and closing the rake to a double acting valve on the tractor.
5. If the rake is equipped with the optional Hydraulic Rear Opening Width Cylinder, connect the hydraulic
hoses to a double acting valve on the tractor.
6. Connect the 7-pin electrical connector to tractor if the rake is equipped with optional transport
lighting.

PREPARING FOR OPERATION

-16-
(A)