Flowserve FlowTop V726 Disassembly And Reassembly Instructions page 44

44
All manuals and user guides at all-guides.com
Di s as s em b ly
S tep 08
S tep 09
R ea s s em bly
S tep 09
Reassembly takes place in reverse order.
S tep 08
• Unscrew hexagon nut (2.6)
• Remove pressure ring (2.7) and profi le seal ring (2.8)
CAUT IO N !
The plug unit can drop down !
Do not damage the high quality stem surface !
• Remove plug unit from the bonnet
CAUT IO N !
Do not damage high quality stem surface,
plug guide and bellows !
CAU TIO N !
Clean parts, check plug unit and plug guide
in the bonnet for damage.
• Grease plug shaft and thread on the bellows lightly and
insert in the bonnet
CAU TIO N !
Lubrication as per Table 06 (Page 65)
Do not grease stem !
• Put profi le seal ring (2.8) and pressure ring (2.7) on
• Screw on hexagon nut (2.6) and tighten "on block"
CAU TIO N !
Use new profi le ring (2.8) !
Secure bellows against twisting !
Schmidt Armaturen
AI - FlowTop