Table of Contents
Advertisement
PRODUCT DESCRIPTION
Heating and cooling system pressurisation top up unit with integral water storage tank and electric
motor driven peripheral pump, automated control system consisting of pressure transducer and
water level sensors. The tank includes an AB air gap for category 5 fluid isolation (BS EN 1717).
APPLICATION
The Flowpress Mini range is designed to provide initial system fill and intermittent water top up
to compensate for intermittent losses in system pressure in heating and cooling systems in
commercial or industrial applications. These could include slight leaks, air venting, etc. The units are
not designed to deal with sudden losses of system pressure due to major water losses over
extended periods. They are also not to be used for water boosting applications.
STORAGE
If this product is not to be installed immediately on receipt, ensure that it is stored in a dry, frost and
vibration free location in its original packaging.
CONTENTS Page
Important Facts - read before commencing installation
5
6
7
9
10
14
18
25
27
28
29
30
31
34
Advertisement
Table of Contents
Need help?
Do you have a question about the Flowpress Mini Single and is the answer not in the manual?