Related Manuals for FLOWTECH flowpac compact 1F.D
Summary of Contents for FLOWTECH flowpac compact 1F.D
- Page 1 1F.D Pump Manual OPERATION AND MAINTENANCE MANUAL First Publication Date: 01/09/2020 Revision: Revision Date:...
- Page 2 General Information These instructions are to assist in the installation of the flowpac compact 1F.D Pump please follow them carefully. If, having read this Operation & Maintenance Manual, there is any doubt about any aspect of the installation please don't hesitate to contact our technical team.
- Page 3 Water Solutions. This document is intended for ALL installers, operators, users and persons carrying out maintenance of this equipment and must be kept with the equipment, for the life of the equipment and made available to all persons at all times.
-
Page 4: Safety Warnings
Safety Warnings & Precautions These instructions should be read and clearly understood before working on the system. Please read this manual carefully and all of the warning signs attached before installing or operating the equipment keep this manual handy for your reference. This equipment should be installed, adjusted and serviced by trained and qualified personnel. - Page 5 exclamat CAUTION! - It is strongly recommended that all electrical equipment conforms to National Electrical Codes and local regulations. Only qualified personnel should perform installation, alignment and maintenance. The manufacturer reserves the right to alter the technical data in order to make improvements or update information. exclamat CAUTION! - Failure to observe these rules will render the guarantee invalid.
- Page 6 General Before starting the pump, read this instruction booklet carefully and keep it in a safe place for future reference. The pump must only be used for the purpose for which it was designed. For safety reasons the pump must not be used by anyone under the age of 16 or by anyone who has not read and understood the present instructions booklet.
-
Page 7: Starting The Pump
Starting the pump Given the different provisions applicable to the safety of electric systems in different countries, make sure that the pump system, as concerns its intended use, is in accordance with current legislation. Before starting the pump, make sure that: The voltage and frequency specified on the pump’s nameplate coincide with those of the available •... -
Page 8: Troubleshooting
Troubleshooting Before taking any troubleshooting action, disconnect the pump from the power supply (i.e. remo- ve the plug from the socket). If there is any damage to the power cable or pump, any necessary repairs or replacements must be performed by the manufacturer or his authorized customer support service, or by an equally-qualified party, in order to prevent all risks. - Page 9 Unit 1 Lock Flight Buildings, Wheatlea Industrial Estate, Wigan, Greater Manchester WN3 6XP United Kingdom 9001 : 2015 REGISTERED Membership No. 700106 Certificate No. 185352020 Copyright © 2020 • All Rights Reserved • Flowtech Water Solutions Limited • Company Number: 05125479 • VAT Number: 836 8024 19...