Chapter 1 - Introduction; Minimum Requirements - Aztech Easy Start Manual

Chapter 1 – Introduction
Thank you for purchase our 4-Port Ethernet USB Wireless-G ADSL2+ Router. The Wireless 4-
Port Router allows you to share high-speed broadband connection with multiple PC using a
single device wired or wireless.
The 4-Port Ethernet USB Wireless-G ADSL2+ Router can be connected to any
computer/notebook with a 10/100 Base-T Ethernet card or USB port for wired connection or an
IEEE 802.11b/g Wireless adapter. The Ethernet ports have Auto MDI/MDIX feature which can
allows both cross or straight UTP cable to be utilized. The Wireless 4-port Ethernet Router has
an in-built IEEE802.11g Wireless LAN Access Point for wireless connectivity.
This documentation assumes that you have already installed an Ethernet card or a wireless
adapter on your computer/notebook
1.1

Minimum Requirements

Pentium ® MMX 233MHz
•
•
A CD-ROM Drive
•
Ethernet card installed with TCP/IP Protocol (required only if you are connecting
to the ETHERNET port of your ADSL Router)
•
USB port (Required if you are connecting to the USB Port of your ADSL Router)
•
IEEE 802.11b/g Wireless adapter (Required if you are connecting to the Wireless
Access Point of the router)
•
Host Operating Systems support for USB:
- Windows® 98 Second Edition
- Windows® Me
- Windows® 2000
- Windows® XP
- Windows® XP x64 Edition
- Macintosh OS 10.2 & above
•
OS independent for Ethernet
•
Web Browser support:
- Microsoft Internet Explorer 4.0 (or later versions)
- Netscape® Navigator 3.02 (or later versions)
ADSL2+ 4-Port Ethernet USB Wireless-G Router - Easy Start
Page 7 of 46