Table of Contents
Advertisement
Chapter 3 – Configuring Your Ethernet Network Card
If your computer/notebook is connected to the Ethernet Port of the ADSL Router, proceed with
the following instructions. If your computer/notebook is connected to the USB Port of the ADSL
Router, proceed with
The illustrated screen shots serve only as examples. For any dissimilarity, please follow the
instructions closely as prompted on your Computer.
NOTE: Proceed with the following ONLY if your computer/notebook is connected
to the Ethernet Port of your ADSL Router.
For Windows ® 98 Second Edition / Windows ® Me
3.1
Proceed with the steps below:
1. From your Windows desktop, right-click on the Network Neighborhood icon. Select
Properties.
2. From the Configuration tab, select TCP/IP-> xxx where xxx refers to the model of your
Ethernet Card that is connected to your ADSL Router.
3. Click Properties as shown below in Fig 1-11.
Chapter 4.
Figure 1-11 : Network settings
ADSL2+ 4-Port Ethernet USB Wireless-G Router - Easy Start
Page 16 of 46
Advertisement
Table of Contents
Need help?
Do you have a question about the Easy Start and is the answer not in the manual?
Questions and answers