For Mac ® Os 10.2 & Above - Aztech Easy Start Manual

For Mac ® OS 10.2 & above
4.5
Proceed with the steps below:
1. Power on your computer to start Mac OS X (V10.2 & above).
2. Place the Installation CD into your CD-ROM Drive.
3. Access to
USBCDCEthernetv1_2.pkg file and open, as shown in Fig 1-25.
4. A Macintosh® Administrator authentication window will be prompted. Enter your
administrator login Name and Password or phrase. Click on OK to proceed. See
Fig 1-26.
the CD-ROM drive
Figure 1-25 : Installation from Location
Figure 1-26 : Authentication
ADSL2+ 4-Port Ethernet USB Wireless-G Router - Easy Start
and double-click on Mac folder.
Page 25 of 46
Select