Table of Contents
Advertisement
4. Click the IP Address tab.
5. Select the option Obtain an IP address automatically and click OK to save the settings.
See Fig 1-12
6. Ensure that your ADSL Router is powered ON.
7. Restart your system.
8. Proceed to
Chapter 5.
For Windows ® 2000 / Windows ® XP
3.2
Windows® 2000:
a.
From your Windows desktop, right-click on the icon My Network Places and select
Properties.
b.
At the Network and Dial-up Connections window, right-click on the Local Area
Connection icon and select Properties.
Windows® XP: (Instructions are based on default Start menu option)
a.
From your Windows desktop, click Start > Programs > Accessories >
Communications > Network Connections.
b.
Right-click on the Local Area Connection icon that reflects the model of your
Ethernet Card that is connected to your ADSL Router and click Properties.
Ensure that the field Connect Using indicates the model of your Ethernet Card that is connected
to your ADSL Router. See Fig 1-13.
ADSL2+ 4-Port Ethernet USB Wireless-G Router - Easy Start
Figure 1-12 : TCP/IP Properties
Page 17 of 46
Advertisement
Table of Contents
Need help?
Do you have a question about the Easy Start and is the answer not in the manual?