Information About Replacements; Engine Oil Replacement - Kohler KDI 3404TCR Owner's Manual

INFORMATION ABOUT REPLACEMENTS

6
6 INFORMATION ABOUT REPLACEMENTS

6.1 Engine oil replacement

Danger
• Disconnect the negative wire (-) from the battery to avroid
accidental engine stating.
Important
• Before proceeding with operation, read
• Place engine on level sur face to ensure accurate measurement
of oil level.
•
Before proceeding, perform the operation described in
6.2 - Point 1.
NOTE : Perform this operation with warm engine, to get a better fluidity
of the oil and get a full discharge of oil and impurities contained in it.
1. Loosen the oil filler cap A (Fig. 6.1) .
2. Remove the oil dipstick B .
3. Remove the oil drain plug D and the gasket E (the oil drain plug
is on both sides of the oil sump).
4. Drain oil in an appropriate container.
(For the exhausted oil disposal, refer to
SCRAPPING
5. Replace gasket E .
6. Tighten the drain oil plug D (tightening torque at 50 Nm ).
7. Perform the operation described in
8. Add the type and amount of oil recommended (
Tab. 2.2 ).
Important
• Do not exceed the MAX level on the dipstick.
9. Fit and remove the oil dipstick B to check the level.
Pour in fluid until reaching the MAX level mark.
10. Upon completion, reinstall the oil dipstick B completely.
11. Tighten the cap A .
NOTE: Click on the icon to play the procedure.
EN 38
).
Par. 6.2
Par. 3.2.2
Par.
Par. 6.5 DISPOSAL and
- point 2 to 5.
Tab. 2.1 and
Fig. 6.1
Fig. 6.2
Fig. 6.3
Fig. 6.4
https://www.youtube.com/
embed/T7XFP3Vn_q0?rel=0