Kohler KDI 3404TCR Owner's Manual page 16

2
FUEL PARAMETER
Cetane number
Fuel density at 15°C
Sulfur content
2.5.5 Emission-Related Installation Instructions Failing to follow the instructions in the applications guidebook
when installing a certified engine in a piece of nonroad equipment violates federal law (40 CFR 1068.105(b)), subject
to fines or other penalties as described in the Clean Air Act.
OEM must apply a separate label with the following statement: "ULTRA LOW SULFUR FUEL ONLY" near the fuel
inlet.
Ensure you are installing an engine appropriately certified for your application. Constant speed engines may only be
installed on constant speed equipment for constant speed operation.
If you install the engine in a way that makes the engine's emission control information label hard to read during
normal engine maintenance, you must place a duplicate label on the equipment, as described in 40 CFR 1068.105.
EN 16
TECHNICAL INFORMATION
3
Kg/m
mg/kg or ppm
UNIT
Min. 49
820 - 860
max. 500
LIMIT VALUE