Ats Regeneration Strategy (Only For Kdi 3404Tcr Ht Configurations) - Kohler KDI 3404TCR Owner's Manual

4.7 ATS regeneration strategy (only for KDI 3404TCR HT configurations)

Only for Stage V configurations
You can intervene on the machine control panel for the DPF regeneration operations "only if requested by means
of specific warning lights or messages on the control panel".
Tab. 4.11 describes the level of particulate accumulation, the relationship with the warning lights that will light up
on the panel, the performance limitations of the engine and the operator's options intervention.
Forced regeneration must be executed in accordance with the machine instructions.
4.11
SOOT WARNING
LEVEL LAMPS *1
Level 0
Level 1
Level 2
Level 3
Fixed
Level 4
Flashing
Level 5
Flashing
*1: The warning lights be different – consult the machine manual.
*2: Unless stated otherwise in the machine manual.
INFORMATION ABOUT USE
(see Par. ATS)
ENGINE DE-
RATE
Engine de-rate.
Strong Engine
de-rate.
OPERATOR POSSIBLE
ACTIONS
Forced Regeneration is
Necessary.
Forced Regeneration is
Necessary.
Contact an authorized
KOHLER workshop.
Service Regeneration
Required
4
OPERATING
CONDITIONS
•
No condition
•
Coolant
temperature at 60
°C
•
Do not switch the
engine off
•
Stationary
vehicle
•
No load applied
to the engine *2
•
Coolant
temperature at 60
°C
•
Do not switch the
engine off
•
Stationary
vehicle
•
No load applied
to the engine *2
REGENERATION via
Kohler software
29
EN