Information About Replacements; Engine Oil Replacement - Kohler KDI 1903M Owner's Manual

6
Disconnect the negative wire (-) from the battery to avoid accidental engine starting.
•

6.1 Engine oil replacement

• Place engine on level surface to ensure accurate
measurement of oil level.
NOTE: Perform this operation with warm engine,
to get a better fluidity of the oil and get
a full discharge of oil and impurities
contained in it.
1. Loosen the oil filler cap A (Fig. 6.1).
2. Remove the oil dipstick B.
3. Remove the oil drain plug D and the gasket E (the oil drain
plug is on both sides of the oil sump).
4. Drain oil in
(For the exhausted
Par. 6.6 DISPOSAL and
5. Replace gasket E.
6. Tighten the drain oil plug D (tightening torque at 35 Nm).
7. Perform the operation described in
8. Add the type oil recommended
9. If the plug A is not accessible, use the oil filler cap C.
• Do not exceed the MAX level on the dipstick.
EN
30

INFORMATION ABOUT REPLACEMENTS

Before proceeding with operation, read
•
Important
an appropriate container.
oil disposal, refer
SCRAPPING).
Par. 6.2.
(Tab. 21 and Tab.
Important
Danger
Important
A
6.1
to
2.2).
6.2
A
6.3
Par. 3.3.2.
E
D
D
C
ED0053029510
B
_14
Index