4
4.7 ATS regeneration strategy (only for Stage V configurations)
Only for Stage V configurations
You can intervene on the machine control panel for the DPF regeneration operations "only if requested
by means of specific warning lights or messages on the control panel".
Tab. 4.11 describes the level of particulate accumulation, the relationship with the warning lights that will
light up on the panel, the performance limitations of the engine and the operator's options intervention.
Forced regeneration must be executed in accordance with the machine instructions.
4.11
SOOT
LEVEL
Level 0
Level 1
Level 2
Level 3
Level 4
Level 5
*1: The warning lights be different – consult the machine manual.
*2: Unless stated otherwise in the machine manual.
EN
32
INFORMATION ABOUT USE
(see Par. ATS)
WARNING
ENGINE DE-
LAMPS *1
RATE
Fixed
Engine de-
rate.
Flashing
Strong Engine
de-rate.
Flashing
OPERATOR POSSIBLE
ACTIONS
Forced Regeneration is
Necessary.
Forced Regeneration is
Necessary.
Contact an authorized
KOHLER workshop.
Service Regeneration
Required
OPERATING
CONDITIONS
•
No condition
•
Coolant
temperature at
60 °C
•
Do not switch
the engine off
•
Stationary
vehicle
•
No load
applied to the
engine *2
•
Coolant
temperature at
60 °C
•
Do not switch
the engine off
•
Stationary
vehicle
•
No load
applied to the
engine *2
REGENERATION via
Kohler software