Only Handle By Means Of The Points Marked By Y; It Is Forbidden To Handle Using The Points Marked By N - Kohler KDI 1903 TCR Workshop Manual

2.17.5 ACACT (versions with DOC+DPF device - Stage V
only)

- Only handle by means of the points marked by Y .

- It is forbidden to handle using the points marked by N .

NOTE: The sensor includes ceramic material.
- Do not install sensors which suffered impacts or falls.
- Do not install sensors in case of external contamination
- Do not install visibly damaged sensors
- Use exclusively the socket wrench to install the sensor
2.17.6 EGTS ( versions with DOC+DPF device - Stage V only )
- Only handle by means of the points marked by Y .
- It is forbidden to handle using the points marked by N .
NOTE: The sensor includes ceramic material.
- Do not install sensors which suffered impacts or falls.
- Do not install visibly damaged sensors
- Do not install sensors in case of external contamination
- Do not apply any force on the cable or the metal elbow
Fig 2.59a
Fig 2.59b
77 EN