First Time Usage; Range-Button - Futech MULTIPOWER 4.6 User Manual

SAFETY
Please read the safety instructions provided in
the separate booklet provided with the device.
Risk of electrocution. High voltage circuits, both
AC and DC, are very dangerous and should be
measured with great care.
Turn function switch OFF when meter is not in
use. "OL" appears when a measurement exceeds
the selected range.
BATTERY
To avoid electric shock, remove test leads from
the meter before removing battery/fuse cover.
This appliance should only be used with the
supplied 4x AAA alkaline batteries or similar AAA
batteries.

FIRST TIME USAGE

Remove all protection foils.
Open the battery compartment and insert the
4x AAA alkaline batteries. Please take care to
respect indicated polarities.
4
USE

RANGE-BUTTON

The autorange mode automatically selects the
proper range for the measurement being made
and is generally best for most applications.
For measurement situatons requiring that a range
be manually selected, perform the following:
· Press the RANGE-button [03]. The "AUTO"
indicator [U] will no longer be shown on the
display.
· Press the RANGE-button [03] to step through
the available ranges until the desired range is
selected.
· To exit the Manual Ranging mode, press and
hold the RANGE-button [03] until the "AUTO"
indicator [U] reappears.
NOTE
The RANGE-button [03] does not work on
Frequency Duty Cycle, Capacitance or Temper-
ature.