Diode Test; Capacitance Measurements - Futech MULTIPOWER 4.6 User Manual

DIODE TEST

NOTE
Never test diodes on a live circuit.
· Set the rotary function switch [05] to the
position.
· Press the MODE-button [04 ]until the " " symbol
[M] appears on the display.
· Insert the black test lead into the COM input
jack [08] and the red test lead into the
jack [09].
· Touch the test lead probes to the diodes under
test
12
· Forward voltage will indicate 0.4 to 0.7 on
the display. Reverse voltage will indicate "OL"
(overload) [Z]. Shorted devices will indicate
near 0 and an open device will indicate "OL" in
both polarities.

CAPACITANCE MEASUREMENTS

+ —
NOTE
Safely discharge capacitors before taking
capacitance measurements.
input
· Set the rotary function switch [05] to the CAP
position.
· Insert the black test lead into the COM input
jack [08] and the red test lead into
—
+
F
— +